B 500/52

B-500/52 is a self suspended ceiling of sandwich construction and designed for easy and rapid installation with no connecting profiles.
No additional (loose) insulation required to maintain fire class.
Self suspended up to 3000 mm.
Weight All weights are based on system weight, including all profiles.

Download Catalogue : B 500/52

INSPECTION HATCH FOR B-500

For quick access to technical spaces above the ceiling such as ventilation, electrical wiring etc. Surface is normally the same as the ceiling to make a discreet finish.
The hatch is supplied with frame / counter frame for cut out, 3-point espagnolet lock and piano hinge.

Download Catalogue : INSPECTION HATCH FOR B-500

B 600/40

B-600/40 is a self suspended ceiling of sandwich construction and designed for easy and rapid installation with no connecting profiles.
Self suspended up to 2715 mm.
Weight All weights are based on system weight, including all profiles.

Download Catalogue : B 600/40

T-600/40/30

T-600/40 is a self suspended ceiling of sandwich construction and designed for easy and rapid installation with no connecting profiles.
Self suspended up to 2715 mm (T-600/40).
Self suspended up to 3015 mm (T-600/30).
Weigth All weights are based on system weight, including all profiles.

Download Catalogue : T-600/40/30

M-200/250/300

Ceiling can be fitted – and refitted as necessary – swiftly and easily with the panels clipping into a carrier system and then secured in place by screws. Again, to facilitate access, each individual panel can be easily removed.
The system fully satisfies all current fire regulations and, although very light, has very good sound control properties. It has been used with success on marine vessels, oil rigs and other offshore installations.
The flexibility of the ceiling system can easily cope with a variety of lighting and ventilation systems.
Colours Colour is obviously an essential element in interior design, so although standard panels are white, we can work with your designers to meet almost any colour specification.

Download Catalogue : M-200/250/300

TILES P-31

This type of ceiling is often used in public areas. Norac delivered often the tiles integrated with special beams, domes, etc.
The tile system is very easy to install, using a coventional T-rail suspension system. Each tile is thus easily removed to allow quick access to the ceiling void. The system is only for areas with C-class.
Tiles are available in the following sizes: 300×300 mm, 600×600 mm and 300×600 mm.
Colour Tiles are normally finished in white, but other colour finishes can be supplied.
Installation The tiles are held in place by rolled steel grid sections providing a very rigid structure

Download Catalogue : TILES P-31

TILES P-52

There are certain situations where only a tile has the visual and functional qualities required. C-class.
Our marine tiles have been chosen for larger areas such as dining rooms, lounges etc. They have excellent acoustic properties and can be supplied with a plain or perforated face depending on the sound requirements. Perforated – C-class only.
Marine tiles – colour Colour is obviously an essential element in interior design, so although standard panels are white, we can work with your designers to meet almost any colour specification.
Recessed light fittings are available.

Download Catalogue : TILES P-52

COLOUR AND SURFACES

PVC coated steel or aluminium sheets Decorative foil with strippable protective film. The foil complies with international regulations for spread of flame tests to class 1, and may be used for all interiors on board. Available in a great variety of colours.
HMP*) coated steel sheets As above but PVC free solution.
*) Highly Modified Polyester.
Dobel 2000 PVC free sloution. Dobel 2000 consists of a 20 µm thick printed polyester foil laminated into painted metallized steel. Allows multiple colours/patterns.

Painted surface Supplied with strippable protective film. Colours to RAL or NCS standards. Single colours only.

Stainless steel surface Standard quality AISI 304 / 316 (grit 280). Delivered with strippable protection film

Galvanized surface Aluzink, hot dipped galvanized steel.
Primed surface Standard grey backing coat. Thickness 10 microns.

Download Catalogue : COLOUR AND SURFACES

MS/MC

The doors are supplied complete with top element (option), frame, counter frame, door leaf, stainless steel threshold and hardware. Built-in re-inforcement for door closer in top of door leaf as standard.

Download Catalogue : MS/MC

F 300

Galvanized steel cassettes of 3 mm thickness.
All 4 edges are bent for maximum strength.

Download Catalogue : F 300

K 600

K-600 is designed with integrated joint profiles for rapid installation, leaving a flush surface with single seam joints. Available in standard
or modular system.
Approved B-15 with cable penetrations availa ble for several wall types.
The system have been shock tested. More information available on request.
K-panels are also available in aluminium construction in B-15 with considerable weight savings.
See technical description below.
Weight All weights are based on system weight, including all profiles.

Download Catalogue : K 600

Q-600/CF-600

Q-600 is an acoustic wall system
of sandwich construction with an exellent sound reduction quality.
Q-600 is a rigid system with integrated joint profiles and allows for easy and rapid installation.
Flush surface with single seam joints.
Available as a modular system.
50 mm panels available with vertical cable ducts in B-15.
70 mm panels have the possibility to draw cables horizontal and vertical.
Weight All weights are based on system weight, including all profiles.

Download Catalogue : Q-600/CF-600

C-600/CS-600

C-600 is an acoustic double wall system with two independent wall elements installed in the same profile system.
Available as standard or modular system.
Allows installation of electrical cables before completing assembly (in 70 mm version).
The wall elements are special stiffened and ap proved according to High Speed Code (HSC) for 30 minutes non-load bearing.
Weight All weights are based on system weight, including all profiles.

Download Catalogue : C-600/CS-600

CSG-600/70

The use of additional insulation between the two panels of a CS-600/70 wall improves the
sound reduction by an amazing 4dB compared to CS system on page 15.
Note that building thickness is
not more than 70 mm.
Weight All weights are based on system weight, including all profiles.

Download Catalogue : CSG-600/70

C.I.S PANELS

Standing for “Clip In System”. It is the ease and speed with which the CIS panel systems are installed and demounted that makes this system the most popular and widely used system in the market place today. All panels within the CIS range are rigid in strength and extremely flexible in cutting and installing. Available as a standard or fully modular system.
Details Non-load bearing composite firewalls for
the offshore and marine industries.
The A60 CIS-100A wall doubles as the BD special acoustic partition system giving a good sound reduction of 46 dB and a good acoustic absorption factor of 1.03 at 500 Hz. The system is certified for use with perforated steel to either one or both panel faces.

All weights shown are for the fully installed system and include all profiles. Standard Conduit Raceways size 20 x 30mm.

Download Catalogue : C.I.S PANELS

LIGHT WEIGHT OMEGA

Early developments in composite firewalls by BD Systems utilised the “Omega” type joining profile. This series of panels is always popular where space saving and flexibility of installation are important considerations.

Significant loads can be secured to the walls when fixing directly into the “Omega” joints. Available as a standard or fully modular system.
Details Non-load bearing lightweight A Class wall lining and partition panels for the offshore industry.

All weights shown are for the fully installed system and include all profiles.

Optional extras include – Conduit raceways
( 2 – 20 x 30 ), penetration kits and reinforcement posts and plates.

Download Catalogue : LIGHT WEIGHT OMEGA

A60

A totally new and revolutionary concept in composite panel manufacturing.
• A fully mechanically fixed system. • Lightweight construction. • Wind and blast resistant.
External Non load-bearing stainless steel panels will replace conventional heavy steel plate cladding. No need for added insulation or decorative liners.
Internal Non load-bearing decorative panels will replace conventional steel plate bulkheads with added insulation and decorative liners. Typically for use around Galley’s, Laundry’s and Plant Rooms.

Download Catalogue : A60

H120

A totally new and revolutionary concept in composite panel manufacturing.
• A fully mechanically fixed system. • Lightweight construction. • Wind and blast resistant.
External Non load-bearing stainless steel panels will replace conventional heavy steel plate cladding. No need for added insulation or decorative liners.
Internal Non load-bearing decorative panels will replace conventional steel plate bulkheads with added insulation and decorative liners. Typically for use around Galley’s, Laundry’s and Plant Rooms.

Download Catalogue : H120

HD OMEGA

Further development of the “Omega” concept by BD has culminated in the certification of the HD (Heavy Duty) range of products. A range that covers all A and H Class firewall require ments for both Internal and External use.
The HD Deck panel system is used as an “External Roof Deck System” and as an “Internal Deck System”. The range available is from A0 to A60.

Download Catalogue : HD OMEGA

H60

As a fully mechanically fixed structure CLEARSPAN TM is a unique Lightweight Blast & Fire Wall System.
Manufactured from 2 x 50mm thick composite panels.
The unique design enables the inner and outer panels to be held in place with a structural panel joint.
The cavity structure is so designed that in the event of an explosion, the steel supports between the joint system will collapse in a controlled manner reducing the energy imported to the supporting structure whilst at the same time maintaining structural integrity in the face of a Hydrocarbon fire.

Download Catalogue : H60

STANDARD EQUIPMENT / ACCESSORIES

Download For More Our Catalogue : STANDARD EQUIPMENT / ACCESSORIES